Typical 2026 prices for replacing a bay start at about £1,200 for a three panel white uPVC bay, and the cost rises with the size of the window, choosing timber or aluminium frames, and any structural work such as installing a steel beam. These are typical published 2026 figures, and real quotes depend on your house, access and the final finish. Replacing a bay is a major undertaking that worries many homeowners because in older buildings the original window frame often carries the weight of the wall or roof above it. Getting the structural support right is just as important as choosing the glass.
What replacing a bay window involves
You are normally hiring a general builder, a main contractor or a specialist window fitting firm for this job. They will manage the core installation and bring in subcontractors for specific trades, such as plastering the internal walls or repairing external brickwork. The immediate priority during the work is making the building weathertight. This means sealing the new frame to protect the inside of your home from rain, wind and cold temperatures.
If your house was built or refurbished before 2000, the surrounding materials may contain asbestos. This is a hazardous material and must be dealt with by competent people before any further work takes place.
The process of replacing your bay window usually involves the following steps:
- Removing the old window frame and disposing of the waste.
- Checking the structure above to ensure it is safe and supported.
- Fitting the new frame.
- Making the building weathertight to protect the inside of your home.
- Fitting internal window boards.
- Plastering the walls around the new frame ready for decoration.
A good builder will walk you through the finished job so you can look for minor defects, a process known as snagging.
Typical 2026 bay window prices
Builders price from drawings and a specification, not from a cost per square metre. Per square metre figures are only a way to set an early budget, and published figures differ widely because some cover a basic shell and others a finished room. When looking at a bay window replacement cost, estimates vary between 2026 price lists depending on what is included.
The table below shows typical 2026 prices, covering the supply and fitting of the window with labour included.
|
Bay type |
Typical 2026 total |
|---|---|
|
3 panel white uPVC |
£1,200 |
|
4 panel white uPVC |
£1,750 |
|
5 panel white uPVC |
£2,350 |
|
Small 6 panel white uPVC |
£2,550 |
|
Large 5 window white uPVC |
£2,950 |
|
3 panel timber |
£2,150 |
|
4 panel timber |
£2,550 |
|
3 panel aluminium |
£2,150 |
|
4 panel aluminium |
£2,550 |
These are typical published 2026 figures, and local quotes will differ.
Other 2026 price lists separate the costs differently, so do not combine their figures with the table above. They put a small uPVC replacement at £1,800 to £2,800. A medium uPVC job with minor structural work is £2,800 to £4,200. A timber replacement is estimated at £4,000 to £7,000, while aluminium or bespoke designs are £5,000 to £8,500 or more. A complete structural rebuild with steel support is £3,500 to £10,000 or more.
Location influences the price. Some 2026 figures put London and South East fitting costs 20 to 40 per cent higher than the North of England or Wales. For example, a Leeds uPVC ground-floor bay was £2,700 in total, whereas a London Victorian terrace with a structural upgrade was £8,500 in total.
How size and material change the price
The material you choose changes the total quickly. Material only costs, excluding labour, are £800 to £1,600 for white uPVC. A 1930s bay replacement is put at £1,500 to £3,500, and a bow window in three section white uPVC at £1,250 to £1,500, so ask whether labour is included in any figure you are given.
Upgrading the glass also pushes the price up. Estimates vary. Some 2026 price lists put a triple glazing upgrade at £300 to £700 per bay, others at £300 to £800.
Labour is a large share of any job. The day rate is £250 to £275 per day, which typically covers two to three people. The labour for a two to three day job is £500 to £825. Removing the old bay takes about half a day and costs about £150, excluding waste removal.
Always ask for a quote rather than an estimate. A quote is fixed, whereas an estimate is not. Accepting an estimate as if it were a quote is a common mistake.
Structural work and the lintel above
The structure above your window is the most complex part of the job. In older buildings, the window frame often carried the weight of the wall or roof above without a lintel. A lintel is a beam over an opening that supports the heavy masonry above it.
Richmond upon Thames Council says that if a bay window is being replaced, the building control officer must be satisfied that proper structural support is provided above the window. Where the old frame carried the weight, a lintel should be fitted during replacement or the new frame carefully reinforced, and an engineer or builder decides how. New lintels may be required to support masonry over openings, and extra structural support may be needed for bay windows.
If structural changes are needed, you may pay for a structural engineer to produce calculations. You can read our guide on when you need a structural engineer and what they charge to understand this step. Structural engineer calculations and drawings cost £200 to £500.
Installing a steel beam costs £1,500 to £3,500 depending on access and the load it needs to carry. Frame reinforcement costs £500 to £2,000. Builders often use provisional sums for structural work. These are allowances in the quote for things that cannot be priced accurately until the old window is removed and the true condition of the brickwork is exposed.
Adding a new bay window
Adding a completely new bay window to a flat wall is a larger project than replacing an existing one. If you want to install a new bay window on the front elevation, the Planning Portal says it would require planning permission because it is classed as a forward extension. Confirm the position for your house with your local council.
Creating a new opening also means you must comply with building regulations. Building regulations for new openings can affect thermal heat loss, structure, ventilation and fire safety.
You will need drawings, a specification and a schedule of works to get accurate prices for adding a new bay. These documents tell the builder exactly what to quote for, ensuring you do not face unexpected bills later. Changing the design mid-build without agreeing the cost in writing is a common way for budgets to run away.
Planning permission and building regulations
Planning permission and building regulations are two separate systems. Many projects need one, both or neither. Replacing the window within a bay is treated the same as any other window. Replacing windows with a similar appearance to the originals generally does not need a planning application.
However, if you live in a listed building or a designated area, different rules may apply. Many extensions and alterations on houses fall under permitted development, but flats and maisonettes do not have these rights.
Building regulations approval is needed for most structural work. Building control approval is likely if the work affects the building structure, which mainly happens when an opening is widened.
You can use a member of a competent person scheme to ensure the work meets regulations. The FENSA scheme covers replacing external windows and doors against building regulations where the property is on its original footprint and room use and size are not altered. It does not cover new conservatories, porches or extensions.
A FENSA certificate confirms compliance with building regulations and is essential when selling. Without a compliance certificate, you will need to pay for an inspection by building control. Council building control can now take enforcement action for up to ten years if work does not comply. You should understand what a FENSA certificate is before the work begins. Scotland and Northern Ireland have their own systems, so check locally if you live there.
What else adds to the cost
Several extras will increase your final bill unless you specifically ask for them to be included in the quote:
- Scaffolding or an access tower, which costs £200 to £450.
- Scaffolding for first floor or projecting bays, which costs £500 to £1,500.
- Skip hire for waste removal at £150 to £400.
- Repairing render or brickwork around the new frame at £150 to £400.
- Internal plastering and making good for £120 to £300.
- Painting and decorating the finished bay for £120 to £250.
- Adding a built-in window seat or board for £200 to £600.
A curved bay design is more complex to build and adds £800 to £2,000. If your new bay window design means moving radiators, gas work needs a Gas Safe registered engineer. Moving plug sockets requires electrical work by a registered electrician. These specialist trades will add to your final costs.
You must also budget for professional and administrative fees. Local authority permit fees cost £100 to £300. If your bay window is on or near a shared wall or boundary, the Party Wall etc. Act 1996 applies in England and Wales. Hiring a party wall surveyor costs £500 to £1,500.
Remember to add VAT at 20 per cent to the total. You should also keep a contingency fund to cover variations. Variations are changes to the design or scope of work after the price is agreed.
How long the work takes
A standard bay window replacement takes a few days. Fitting a three panel uPVC bay takes one to two days. A four panel bay takes two days, and a five panel bay takes two to three days. Timber and aluminium bay windows take two to three days to fit.
Under the CDM Regulations 2015, a domestic client's health and safety duties normally pass to the builder. This means the builder is responsible for keeping the site safe while the window is removed and the house is open to the weather.
You must tell your home insurer before the work starts. Not telling the home insurer is a common mistake.
Common questions
How much is a bay window replacement cost?
Estimates vary. Some 2026 price lists start at about £1,200 for a three panel white uPVC bay, while others put a timber replacement at £4,000 to £7,000 and a structural rebuild with steel support at £3,500 to £10,000 or more. Your actual quote will depend on the size, material and whether the wall above needs new support.
Do I need planning permission to replace a bay window?
Replacing a bay window with one that has a similar appearance generally does not need a planning application. Different rules may apply if you live in a listed building or a designated area, and permitted development rights do not apply to flats. You should always confirm the rules with your local council.
Can I add a new bay window to my house?
Installing a new bay window on the front elevation requires planning permission because it is classed as a forward extension. You will also need to comply with building regulations for the new opening, which cover structural safety, thermal heat loss and ventilation.
Does a bay window need a lintel?
If the original window frame carried the weight of the wall or roof above it, a lintel should be fitted during the replacement or the new frame carefully reinforced, and an engineer or builder decides how. The building control officer must be satisfied that proper structural support is provided above the new window.
How much does a bow window cost?
A bow window in three section white uPVC is put at £1,250 to £1,500, so ask whether labour is included. Structural support, internal plastering and VAT at 20 per cent may come on top.
What to do next
Before you hire a builder or window fitter, you need to gather detailed quotes and check their paperwork. A common mistake in this trade is choosing on price alone or starting without a written contract. You should also watch out for cowboy builders who take on more jobs than they can staff.
Ask each quote to state the material, the panel count, who checks the structure and whether any certificate is included. Being told building regulations are not needed is a severe warning sign.
When comparing builders, follow these steps:
- Get three written quotes against the same drawings and specification.
- Check if they are a member of a competent person scheme like FENSA, or a trade body like the Federation of Master Builders or TrustMark. Confirm membership on the scheme's own register.
- Ask to see proof of their insurance.
- Agree stage payments tied to progress and a final payment on completion.
- Never pay a large cash deposit and avoid cash deals offered without VAT or paperwork.
Under the Consumer Rights Act 2015, building work must be done with reasonable care and skill, for a reasonable price and within a reasonable time where none was agreed. You have a 14-day cooling-off period for contracts agreed at home, by phone or online. Paying at least part of the cost on a credit card gives you Section 75 protection. Do not pay the final instalment until you have finished snagging to check for minor faults and all completion certificates are handed over. If you face a dispute, Citizens Advice is the signpost for disputes.
When you are ready to start gathering quotes, find a builder near you to discuss your bay window project.
Find a top rated builder near you
3,554 builders across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county: