Cost Guides

How Much Do Bifold Doors Cost to Supply and Fit?

What bifold doors cost to supply and fit in 2026 by number of panels and frame, what the opening and making good add, how sliding doors compare, and the building regulations point.

Folding glass doors open from a brick extension onto a patio.

Typical published 2026 supply and fit prices for bifold doors run from about £1,950 for a three panel uPVC set to £7,200 for a five panel aluminium set. Creating the structural opening, hiring scaffold and making good the walls are often extra. Real quotes always depend on the exact width, the frame material, the glazing and whether you are cutting a new opening. Bifold doors are a common feature if you are planning a kitchen extension, but they require careful budgeting.

How much do bifold doors cost fitted?

When you hire a firm to install bifold doors, they usually price the job on a supply and fit basis. This means the quote covers the door system itself, the standard double glazing, the threshold and the labour to fit them. The final bifold doors cost will vary depending on the size of the opening, the ground conditions, access to your garden and the materials you choose.

Labour is a large share of any building job. Some 2026 supply and fit figures cover two fitters for one to two days. If you live in London and the South East, expect your quotes to sit at the upper end of any price range.

Builders and glazing firms price from drawings and a detailed specification. They do not price from a simple cost per square metre. Per square metre figures are only a way to set an early budget, and published figures differ widely because some cover a basic shell and others a finished room. To get an accurate price, you need to provide a schedule of works that outlines exactly what you want the builder to do.

Bifold door prices by number of panels

Builders and manufacturers price bifold doors by the number of panels. A panel is a single hinged leaf that folds back when the door is open. The table below shows typical supply and fit prices for three, four and five panel sets across different materials.

Panels

uPVC

Timber

Aluminium

3 panels

£1,950 to £2,800

£2,000 to £2,800

£3,150 to £4,650

4 panels

£2,800 to £3,500

£3,050 to £3,450

£4,300 to £5,700

5 panels

£3,550 to £4,250

£3,700 to £4,200

£5,250 to £7,200

These figures represent typical published prices for 2026, and your local quotes will differ based on the exact specification. Estimates vary across the industry. Other 2026 price lists put a three panel uPVC set at £1,800 to £3,500 and a three panel powder coated aluminium set at £2,500 to £4,500.

Aluminium, uPVC or timber bifold doors

The frame material is a major factor in the price of the doors themselves. You have three main options to choose from:

  • uPVC sets are the lowest priced in the table above at every panel count.
  • Timber sets sit between uPVC and aluminium in the table above.
  • Aluminium sets cost the most in the table above at every panel count.

On those lists, thermally broken aluminium frames, which have a built-in break that cuts heat loss, sit at higher bands. A three panel set is £3,500 to £6,000, rising to £6,000 to £10,000 or more for five panels.

Timber sets in oak or hardwood range from £3,500 to £6,000 for three panels, and £7,000 to £12,000 or more for five panels, on the same lists.

When comparing quotes, check whether the price includes a traffic door. This is a single door within the set used for everyday access.

What the structural opening and making good add

The prices above cover the doors and the labour to fit them into an existing space. If you want to create a new opening or widen an existing one, the structural work will add a significant amount to your bifold doors cost. Creating or widening an opening may need a lintel or beam to support the wall above, and an engineer's calculation. This work may take an additional day and increase your labour costs.

Supplying and fitting a beam for an opening up to 2.4 metres costs an indicative £800 to £1,200. An opening of 2.4 metres to 3.5 metres costs £1,200 to £2,000, and anything over 3.5 metres is £1,800 to £2,500 or more. To size the beam correctly, you need a structural engineer's calculation.

A calculation for a typical domestic opening costs £200 to £500, with an engineer's hourly rate quoted at around £50 to £90 per hour. Never attempt to remove or support a wall yourself. This is dangerous work that requires a competent builder and a structural engineer, especially when removing a load bearing wall.

You also need to budget for making good. This covers the internal reveal skim and first fix, external rendering and decoration. First fix is the early hidden work before plastering, while second fix covers the visible finishing touches. Any electrical adjustments must be completed by a registered electrician.

Making good typically costs £400 to £1,200 in total. If the doors are being installed above the ground floor, you will need to pay for safe access. Scaffold costs £400 to £900 per week, or an access platform costs £150 to £300 per day.

If your home was built or refurbished before 2000, your home may contain asbestos. This must be dealt with by competent people before any structural work begins. Under the CDM Regulations 2015, a domestic client's health and safety duties normally pass to the builder.

Bifold doors or sliding doors?

Many homeowners weigh up bifold doors against sliding patio doors. Bifold doors fold back in sections, while sliding doors slide along a track.

A separate 2026 price page updated in November gives installed bifold prices, including supply, installation and VAT, but not structural work. This provides a helpful sliding patio doors cost comparison. An aluminium slider starts at about £4,000 fitted. Going by one firm's prices, like for like sliders run about 10 to 20 per cent cheaper than bi-folds. A uPVC slider costs about £2,200, which is roughly half the price of an aluminium bi-fold.

In the same 2026 figures, a three panel aluminium bifold measuring 2.4 metres is typically £4,100, with a range of £3,900 to £5,300. A four panel aluminium bifold measuring 3.2 metres is typically £5,000, ranging from £4,900 to £7,400. A three panel uPVC set of 2.4 metres is typically £3,000, and a four panel uPVC set of 3.2 metres is typically £3,750.

If a structural lintel is required, the same figures note a typical cost of £1,600, ranging from £800 to £2,500. A structural engineer is quoted at £200 to £500.

The Party Wall etc. Act 1996 applies in England and Wales to work on or near a shared wall or boundary, so check whether it affects your plans before work starts. Scotland and Northern Ireland have their own systems, so you should check locally.

Do replacement doors need building regulations approval?

Building regulations and planning permission are two separate systems, and many projects need one, both or neither. Ask your council to confirm what applies to your project. A lawful development certificate gives written proof that a project is permitted development.

Regardless of planning rules, building regulations approval is needed for extensions, loft conversions and most structural and services work. Planning Portal confirms that an external window or door is a controlled fitting under the building regulations, and the rules set out certain standards to be met when one is replaced. Since 1 April 2002, building regulations have applied to all replacement glazing.

A registered installer will be approved to carry out the work to comply with building regulations and will check the replacement doors for compliance. If you are cutting a new opening or installing a beam, this work needs building control, so ask your council. You can choose your local authority's building control department or a private registered building control approver.

GOV.UK states that without approval, you will not have the certificates of compliance you may need when you want to sell your home. Local councils can now take enforcement action for up to ten years against non-compliant work.

What a bifold door quote should include

A proper quote from a general builder or main contractor should be a fixed price provided in writing. A quote is fixed and an estimate is not. A good builder prices from drawings and a specification, outlining exactly what they and the subcontractors they bring in will do.

To avoid hidden extras, ensure your written quote breaks down exactly what is included. A thorough quote for bifold doors should list:

  • Supply and fit of the door system and standard double glazing.
  • The frame material, colour and whether it is thermally broken.
  • A traffic door and a standard threshold.
  • The structural lintel or steel beam if a new opening is needed.
  • A structural engineer's calculation for the beam.
  • Making good the inside walls, external rendering and decoration.
  • Scaffold or access equipment if the doors are above ground level.
  • Waste removal and clearing the site.

Professional fees, planning and building control fees, party wall costs and VAT at 20 per cent are normally outside a basic build quote. Beware of cowboy builders who take on more jobs than they can staff, or who offer cash deals without VAT or paperwork. Under the Consumer Rights Act 2015, tradespeople must provide services with reasonable care and skill, for a reasonable price and within a reasonable time where none was agreed. You also have a 14-day cooling-off period for contracts agreed at home, by phone or online. Section 75 protection applies to credit card payments. Citizens Advice is the signpost for disputes.

Your contract should include stage payments tied to progress and a final payment on completion. Never pay the final instalment before snagging and certificates are done. Snagging is the process of identifying minor faults, such as a stiff hinge or a scratched frame, for the builder to fix before they leave the site.

Make sure your budget includes a contingency fund, and look out for provisional sums in the quote. These are allowances for things that cannot be priced yet. Any changes to the design mid-build are known as variations, and you should agree the cost of these in writing before the work goes ahead.

Common questions

How much do bifold doors cost?

Typical published 2026 prices run from £1,950 to £4,250 for uPVC, £2,000 to £4,200 for timber, and £3,150 to £7,200 for aluminium. The final price depends heavily on the number of panels, the structural work required and whether you choose premium materials like thermally broken aluminium or oak.

What is the difference between bifold and sliding patio doors cost?

Going by one firm's prices, like for like sliders run about 10 to 20 per cent cheaper than bi-folds. For example, an aluminium slider starts at about £4,000 fitted, while a uPVC slider costs about £2,200.

Do I need a structural engineer for bifold doors?

An engineer's calculation matters when you are creating or widening an opening, where a lintel or beam may be needed to support the wall above. Ask your builder and your council whether your own project needs one.

How long does fitting bifold doors take?

Some 2026 supply and fit figures cover two fitters for one to two days. If your project involves creating or widening the opening, this may take an additional day and increase labour costs.

What to do next

If you are ready to move forward with your project, take the time to plan the details and find the right tradespeople. A methodical approach helps keep your budget on track and ensures you get the correct paperwork.

  • Decide whether you want to replace an existing door or widen the opening.
  • Choose your preferred material based on your budget and design.
  • Never start without drawings, a specification or a written contract.
  • Get three written quotes from local builders against the same specification.
  • Confirm whether the quotes include VAT at 20 per cent and waste removal.
  • Ask to see examples of finished jobs and check the firm's insurance.
  • Agree a written contract with stage payments tied to progress.
  • Tell your home insurer about the work before it begins.

Finding a reliable professional is the most important step in any home improvement project. Choosing on price alone is a common mistake. Look for firms vetted by the Federation of Master Builders or TrustMark, the government-endorsed quality scheme. Confirm their membership on the scheme's own register and treat it as a good sign, not a guarantee. Take your time, compare fixed written quotes and find a builder near you to get a realistic price for your home.

Find a top rated builder near you

3,554 builders across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county:

All counties and towns · The UK Top 100 builders

Rachel Dawson
Written by
Rachel Dawson Writer

Rachel writes for Top Rated Builders, with a focus on helping homeowners compare quotes and ask the right questions. Away from the desk, she runs a book club with friends.

Looking for a trusted builder? Browse our verified listings.

Find a Builder